Schneider SpaceLogic KNX Logic Controller - Powerful Solution for Smart Building Automation

Schneider Electric LSS100100 (Wiser for KNX) is a multiprotocol logic controller belonging to the SpaceLogic KNX series. The device supports KNX, BACnet, Modbus RTU/TCP and IP protocols, acting as a gateway between different building automation systems. The supply voltage is 24 V DC and power consumption is only 2 W. Physical interfaces include 1x RJ45 (10BASE-T/100BASE-TX Ethernet), 1x RS-485 (including 47 kΩ polarization resistors, no termination), 1x RS-232, 1x TP-UART2 (KNX bus connection) and 1x USB 2.0 port. The device is equipped with a green LED indicating CPU load and green/red LED indicators indicating run/reset status. The connection terminals are configured as follows: KNX bus terminal 2 cable, 0.8 mm²; power supply clamp terminal 0.5-1.5 mm²; serial communication clamp terminal 0.5-1.5 mm². With dimensions of 90 x 52 x 58 mm (HxWxD), the device is suitable for DIN rail mounting and is 3 modules wide. Supports 150 BACnet points as a BACnet certified B-ASC (Application Specific Controller). Up to 8 simultaneous users can be accessed with different logins and 10 Modbus servers can be configured. WEB SCADA offers functions such as visualization, block programming, data logging, camera streaming, scheduling and e-mail notification. Operating ambient temperature is -5°C to +45°C, relative humidity %0-93 (non-condensing) and operating altitude 0-2000 m. It has IP20 degree of protection and complies with IEC 60950-1 standard. The warranty period is 18 months.