KNX 4 Channel Hybrid Actuator (MTN6700-0104) | Schneider

Schneider Electric MTN6700-0104 SpaceLogic KNX Hybrid Switch Actuator is a modular device that provides relay-based switching on 4 independent channels over KNX bus protocol. Rated operating voltage is 250 V AC (50/60 Hz) and rated current is 10AX. The device supports various load types: LED lamp 300 W (250 V AC), incandescent lamp 2500 W (250 V AC), fluorescent lamp 2500 W (250 V AC) with electronic ballast, low voltage halogen lamp 1100 W (250 V AC) with electronic transformer, low voltage lamp 900 W (250 V AC) with iron core transformer, motor load 1500 VA (250 V AC) and capacitive load 140 µF (250 V AC). Thanks to the manual operation mode, the KNX can control channels independently even without bus voltage. After the application has been loaded, the green LED indicator indicates that the device is ready for operation. Curtain control, switch function and heating channels can be freely configured. The assignment of physical addresses and parameterization is performed by ETS software. Connection to the KNX is via the bus connection terminal on the front panel. The device does not require an auxiliary power supply; it is immediately ready for use when bus voltage is applied. Its dimensions are 72 mm (W) x 90 mm (H) x 64 mm (D) and occupies a total DIN rail space of 4 modules (18 mm). It has an IP20 protection rating and operates in an ambient temperature range of -5°C to +45°C. The white plastic body device complies with IEC 60947-4-1 and IEC 60669-2-1 standards and is CCC certified. Ideal for residential apartments and small office buildings.