KNX 16 Channel Hybrid Actuator (MTN6700-0116) | Schneider

Schneider Electric SpaceLogic KNX Hybrid Switch Actuator (MTN6700-0116) is a 16-channel relay-based switching device. Operating over the KNX bus protocol, this actuator can be used without bus voltage thanks to its manual mode support. The device does not require an auxiliary power supply; it is ready for operation immediately after bus voltage is applied. Rated operating voltage is 250 V AC and mains frequency is 50/60 Hz. Rated current is 10AX. Load carrying capacities are as follows per channel: LED lamp 300 W (250 V AC), incandescent lamp 2500 W (250 V AC), fluorescent lamp 2500 W (250 V AC) with electronic ballast, low voltage halogen lamp 1100 W (250 V AC) with electronic transformer, low voltage lamp 900 W (250 V AC) with iron core transformer, motor loads 1500 VA (250 V AC) and capacitive loads 140 µF (250 V AC). The device dimensions are 216 mm (width) x 90 mm (height) x 64 mm (depth) and suitable for DIN rail mounting. It has a total width of 12 18 mm modules. The device has IP20 protection rating and can operate at ambient temperatures between -5°C and +45°C. It has a white colored plastic body. The curtain/switch function and heating channels are freely configurable. Physical address assignment and parameterization is carried out with the ETS software. Connection to the KNX is via the bus connection terminal on the front. After loading the application, the green LED indicates that the device is ready for operation. Complies with IEC60947-4-1 and IEC60669-2-1 standards.